+39 059 904611 info@alfa-eng.net

Guarantee for our customers

Integrated Policy on Health & Safety and Environment

The Management System applied by Alfa Engineering Soc. Coop is in accordance with section 30 of Italian Legislative Decree No. 81/08 81/08 as well as international standards UNI ISO 45001:2018 e UNI EN ISO 14001:2015, in order to ensure the highest quality in relation to Occupational Health & Safety and Environment.

ISO 14001:2015

ISO 14001.2015 specifies the requirements for an Environmental Management System that an organization can use to manage its environmental responsibilities, comply with the related legislative requirements, and carry out risk and opportunity assessment.

ISO 9001:2015

Thanks to its Quality Dept., Alfa Engineering verifies and makes sure that both the company’s procedures and our joints’ quality are always met through continuous monitoring.

ISO 45001:2018

ISO 45001:2018 is the international standard that specifies the requirements for an occupational health and safety (OH&S) management system, and gives guidance for its use, to enable organizations to provide safe and healthy workplaces by preventing work-related injury
as well as by proactively improving its OH&Sperformance.

Italian Legislative Decree No. 231/2001

Alfa Engineering Società Cooperativa has adopted a code of ethics and acts by an efficient Model for Organization and Management called legislative decree n. 231/2001 that involves a supervisory board to grant an always better work arrangement. No. 231 of 2001, which provides for a supervisory body, to always ensure a better organization of work.

PED: Certification for pressure equipment on the Single European market.

In the perspective of continuous improvement, Alfa Engineering Società Cooperativa has obtained the PED certification in conformity with the European directive 97/23/CE for pressure equipments, in order to get the CE marking on our isolating joints.
To achieve the purpose, we decided to adopt the module “H” of the directive (total quality guarantee).

According to a European level, it includes a list of requirements for the sale and the start up of industrial equipments, of which the first depositary is the Manufacturer, from design to manufacture, as a matter of fact the equipment must comply with safety requirements so that, if properly installed, kept efficient and used for their purpose, health and safety of people is not put at risk.
CE Marking is the guarantee of the above.

In the field of pressure equipments, in order to bear the CE marking, the equipments must undergo a procedure to check the conformity requirements of the PED directive (Pressure Equipment Directive 2014/68/UE) based on different specs according to the pressure risk, perfomed by a Notified Body.

PED directive requires CE Marking for the placing on the market of such equipments on the Single European Market.